Creative Maintenance Solutions recently completed an epoxy flooring project at a manufacturing facility in Fond du Lac, WI. The existing floor was dirty, oily, cracked and pitted. The owner of the facility called CMS to solve their problem; our solution was to install a new single broadcast epoxy floor system to brighten up the space and bring the floor back to life.
CMS WARRANTY & SATISFACTION GUARANTEE
We offer up to a 5-year limited Warranty on 1/8” thick floor systems that is unmatched in the industry. We also offer up to a 3-year Warranty on Single Broadcast floor systems and up to a 1-year Warranty on Thin Mil coating systems. Our Warranty covers material performance and workmanship. With Creative Maintenance Solutions, you can rest assured because your satisfaction is 100% guaranteed.
TYPE OF ENVIRONMENT
FOND DU LAC, WI
SINGLE BROADCAST EPOXY FLOOR SYSTEM
DRAG THE SLIDER TO VIEW BEFORE AND AFTER
The most important process when installing a new epoxy floor is proper surface preparation. CMS shot blasted the floor which is a process that cleans and opens the pores of the concrete. Shot blasting also changes the surface profile of the concrete and ensures that the new epoxy floor will bond to the concrete.
Patch any cracks, joints, or pitted areas with an epoxy mortar. After the epoxy has cured, all patches are ground smooth.
Application of a penetrating epoxy primer for a mechanical bond to the concrete.
Apply the broadcast coat where epoxy is applied to the floor with squeeges and rollers and allowed to self-level. Once the epoxy has leveled it is broadcast or covered with sand until there are no wet spots remaining on the floor.
All excess sand is swept off the floor and a final coat of epoxy is applied to the floor. This final coat is a pigmented epoxy which gives the floor an even appearance.
VIEW OUR LATEST FLOORING PROJECTS
We offer a diverse range of flooring solutions including epoxy floor coatings, polished concrete, urethane cement, decorative concrete, concrete sealer and surface preparation.